Продвижение продаж стоматологический NiCr металлический сплав керамика фарфор

Продвижение продаж стоматологический NiCr металлический сплав керамика фарфор

Product Description Thriden Industrial Co., Ltd TDzir provides super translucent solid zirconia used for full zirconia crowns or copings in the aesthetic zone, It is a fully-contoured dental restoration with no porcelain overlay.These solid zirconia blocks are formed under pressure from nano purity zirconium oxide powder stabilized with yttria, plus additional unique additives for bonding and translucency. Processed by cold isostatic pressing and precise sintering controls, the blocks are guaranteed to have a homogenous density and shrinkage distribution and extremely constant material characteristics.Solid zirconia has quickly become the preferred replacement for full-cast and porcelain to metal restorations in the posterior.  

Best price for nickel-chromium alloy,

Be free Nicr metal alloy, dental zirconia block

Biocompatible, beryllium-free,nickel-chromium alloy for use for casting and ceramic restorations.

1. Product: PFM casting cobalt chrome dental alloy

2. Technical Data & Composition

                           Technical Data                                            Composition

3. Instructions for use

Waxing: Mininum metal thickness (after grinding) should be 0.3mm. Waxing could be as thin as 0.3mm to 0.35mm

Spruing:

A-Direct for single units. Sprueing should be 6mm in length. Based on the size and the thickness of crowns use 6-8 gauge sprues.

B-indirect for multiple units. Use straight 8 gauge sprue, about 3 or 4mm in length and connect it to the unit.

For long spanned bridges use and additional sprue connected to the last unit.

Investing: use high heat investments. follow the manufacturer's instuctions carefully. After investment has set, scrape the top of the investment to allow gases to escape.

Burnout: Place the ring in the furnace at room temperature, increase the temperature to 980-1050°C, with one hour holding time. Add 10/15 extra minutes for each addtional ring.

Our Services

 All kinds raw material for dental cadcam milling:

1, milling burs for cadcam milling system;

2, zirconia blocks for overlay copping and full contour bridge;

3,wax for burnout;

4,PMMA for temporary denture;

5,sintering furnace and heating element;

6,color liquid;

7,dental alloy;

Products supplied:  dental zirconia block, CADCAM milling machine, PMMA&Wax&PEEK, milling burs, sintering furnance & heating element & sintering beads, diamond polisher & grinder, articulator, PFM alloy & CADCAM tatanium disk and so on.

OEM

We can do OEM with free charge on zirconia block according to yours pictures, and package OEM is charged by supplier's quotation.